Fluke Calibration P3000 Pneumatic Deadweight Testers Fluke Calibration P3000 Pneumatic Deadweight Testers The combined pressure and vacuum deadweight tester provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one primary standard. P000278 Pressure Calibrators 0 VND Quantity: 1 Cái


  •  
  • Fluke Calibration P3000 Pneumatic Deadweight Testers

  • Post on 22-09-2015 11:36:50 PM - 998 Views
  • Price: Contact

  • The combined pressure and vacuum deadweight tester provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one primary standard.


Quantity
  • This versatile instrument provides calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons. Units are manufactured to the highest standards with certified accuracies traceable to International Standards Laboratories such as the National Institute of Standards and Technology (NIST). These piston/cylinder type pneumatic standards provide excellent stability, repeatability and accuracy. An optional built-in hand pump can be added for both pressure and vacuum generation.

     

  • Accuracy
    Accuracy1 ±0.015% of reading (±0.008% optional)
    1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
    Mass and PCU Materials of Construction
    Standard weight material Series 3 non-magnetic austenitic stainless steel
    Weight density 7.8 g/cm³
    Optional fractional weights Solution heat treated aluminum
    Weight density 2.7 g/cm³
    Models P3011, P3012, P3013, P3022, P3023, P3025 (V) Piston material Ceramic
    Cylinder material Martensitic steel
    Coefficient of expansion 11 ppm/°C
    Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) Piston material Tungsten carbide
    Cylinder material Martensitic steel
    Coefficient of expansion 16.5 ppm/°C
    Model P3016 Piston material Tungsten carbide
    Cylinder Material Tungsten carbide
    Coefficient of Expansion 11 ppm/°C
    General
    Test port adaptors 1/8, 1/4, 3/8 and ½ NPT or BSP
    Instrument weight 24 lbs
    Instrument size (W x D x H) 17.5 x 12 x 8.5
    Mass set weight (typical) 65 lbs
    Minimum Standard Weight Increments
    P3012, P3022 Pressure 1 inH2O, (5 mbar)
    P3013, P3023 Pressure 2 inH2O, (10 mbar)
    P3014, P3015, P3025 Pressure 1 psi, (0.1 bar)
    P3016, P3031, P3032 1 psi, (0.1 bar)
    P3011, P3022, P3023, P3025 Vacuum 0.2 inHg (10 mbar)
    Optional Fractional Weights
    P3014, P3015, P3025 Pressure 0.1 psi (0.01 bar)
    Built-in Hand Pumps
    Pressure mode Max pressure 300 psi (20 bar)
    Vacuum mode To 90% vacuum
    Operating Fluid for Liquid Lubricated Models
    55-655 Mineral oil (standard)
    Krytox For oxygen-safe applications (optional)
    Options
    PressCal Software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments.
    Krytox As operating fluid for liquid lubricated gas operated models.
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second