Fluke 43B Single Phase Power Quality Analyzer Fluke 43B Single Phase Power Quality Analyzer

Fluke’s single phase analyzers perform the measurements you need to maintain power systems and troubleshoot power problems and diagnose equipment failures.

P000234 Power Quality Analyzers 0 VND Quantity: 1 Cái


  •  
  • Fluke 43B Single Phase Power Quality Analyzer

  • Post on 23-09-2015 09:43:54 AM - 1362 Views
  • Price: Contact

  • Fluke’s single phase analyzers perform the measurements you need to maintain power systems and troubleshoot power problems and diagnose equipment failures.


Quantity

Get control of power problems

The Fluke 43B has been the go-to industry leading single phase analyzer for over a decade in both industrial and classroom settings because of its intuitive ease of use and overall simplicity in performing just the right the measurements that you need to maintain power systems and troubleshoot power problems and diagnose equipment failures.

 

Specifications
Input characteristics Input impedance 1 MΩ, 20 pF
Voltage rating 600 V rms, CAT III
V/A/Hz display True-rms voltage 
(AC + DC)
Ranges 5.000 V, 50.00 V, 500.0 V, 1250 V1
Accuracy ±(1% + 10 counts)
True-rms current 
(AC + DC)
Ranges 50.00 A, 500.0 A, 5.000 kA, 50.00 kA, 1250 kA
Accuracy ±(1% + 10 counts)
Frequency Ranges 10.0 to 15.0 kHz
Accuracy ± ([% of reading] + [counts]): 0.5% + 2
CF crest factor Ranges 1.0 - 10.0
Accuracy ±(5% + 1 count)
Power display Watts, VA, VAR   1-phase and 3-phase,3 conductor balanced loads
Ranges 250 W - 1.56 GW
Accuracy ±(4% + 4 counts) Fundamental Power
Accuracy ± (2% + 6 counts) Total Power
PF power factor Range 0 - 1.0
Accuracy ±0.04
DPF displacement power factor, Cos .F Range 0.25 - 0.9
Accuracy ±0.04
Range 0.90 - 1.0
Accuracy ±0.03
H2 frequency fundamental Ranges 40.0 to 70.0 Hz
Accuracy ± ([% of reading] + [counts]): 0.5% + 2
Harmonics display Voltage, current, frequency Ranges Fundamental to 51st harmonic
Accuracy VA ±(3% + 2 counts) W ±(5% + 2 counts)
Fundamental 2 to 31st harmonic VA ±(5% +3 counts) W ±(10% +10 counts)
32 to 51st harmonic VA ±(15% +5 counts) W ±(30% +5 counts)
Frequency fundamental Ranges 40 Hz to 70 Hz
Accuracy ±0.25 Hz
Phase Range V, A (Between fundamental and harmonics)
Accuracy ±3° to ±15°
Range W (Between voltage fundamental and current harmonics)
Accuracy ±5° to ±15°
K-factor 
(Current and Power)
Range 1.0 to 30.0
Accuracy ±10%
THD total harmonic distortion Range 0.00 - 99.99
Accuracy ±(3% + 8 counts)
Sags and swells Recording times 4 min to 16 days (selectable)
Vrms actual, vrms max, min (AC + DC) Ranges 5.000 V, 50.00 V, 500.0 V, 1250 V1
Accuracy Readings ±(2% +10 counts); Cursor readings ± (2% + 12 counts)
Arms actual, arms max, min (AC + DC) Ranges 50.00 A, 500.0 A, 5.000 kA, 50.00 kA
Accuracy ±(2% +10 counts)
Transient capture Minimum pulse width 40 ns
Useful bandwidth input 1 DC to 1 MHz
Number of transients 40
Voltage threshold settings 20%, 50%, 100%, 200% above or below reference
Reference signal After START, the Vrms and frequency of the signal are measured. From these data a pure sinewave is calculated as reference for threshold setting.
Vpeak min, vpeak max at cursor 10 V, 25 V, 50 V, 125 V, 250 V, 500 V, 1250 V Accuracy: ±5% of full scale
R, C, diode, continuity Resistance ranges 500.0 Ω, 5.000 kΩ, 50.00 kΩ, 500.0 kΩ, 5.000 MΩ, 30.00 MΩ
Resistance accuracy ±(0.6% + 5 counts)
Capacitance ranges 50.00 nF, 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF
Capacitance accuracy   ±(2% + 10 counts)
Diode Ranges 0 to 3.000 V
Diode voltage  
Accuracy ±(2% + 5 counts)
Continuity Beeper on at < 30 Ω ± 5 Ω
Max current 0.5 mA
Temperature °C or °F
Inrush current Inrush times   1 s, 5 s, 10 s, 50 s, 100 s, 5 min
Current ranges 1 A, 5 A, 10 A, 50 A, 100 A, 500 A, 1000 A
Cursor readings A peak max at cursor 1 and cursor 2
Accuracy ±5% of full scale
Time between cursors 4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ±(0.2% + 2 pixels)
Temperature 
(with accessory)
  Range -100 °C - 400 °C
Accuracy ±(0.5% + 5 counts)
Scope display Measurements   DC, AC, AC + DC, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor
Time ranges 20 ns/div to 60 s/div
Max sampling rate 25 MS/s
Bandwidth Voltage channel [1] 20 MHz at inputs, 1 MHz with TL24 leads
Current channel [2] DC to 15 kHz at inputs, 10 kHz with i400s current clamp
Coupling AC, DC (10 Hz - 3 dB)
Vertical sensitivity 5 mV/div to 500V/div
Vertical resolution 8 bit (256 levels)
Record length 512 samples per channel
Base ranges 60 S/div to 20 nS/div ± (0.4% + 1 pixel)
Timebase modes Normal, roll, single
Pre-trigger Up to 10 divisions
Trigger Source Input 1 or input 2 or automatic selection
Trigger Mode Automatic Connect-and-View™, free Run, and single Shot
Connect-and-view™ Advanced automatic triggering that recognizes signal patterns

Automatically adjusts triggering, timebase and amplitude and displays stable pictures

Memories 20 (screens, settings, data)
Recording Recording times 4 min to 16 days (selectable)
Parameters Choose one or two parameters from one of the groups below

Volts/Ampères/Hertz

Power Watts, VA, VAR, PF, DPF, frequency

Harmonics, THD, volts (Fund. and harmonic), ampères (F&H) watts(F&H)

Frequency (H), %(H) of total, Phase(H), KF

Temperature
Resistance Resistance, diode, continuity, capacitance
Scope DC voltage, DC current, AC voltage, AC current, frequency,

Pulse width + or -, phase, duty cycle + or -, peak max, peak min, peak min-max, crest factor

Environmental specifications Operating temperature 0°C to +50°C
Safety specifications Electrical safety EN 61010-1 CAT III, 600V. CSA listed
Mechanical and general specifications Size 232 x 115 x 50 mm
Weight 1.1 kg
Warranty 3 years
Battery life Rechargeable NiMH pack (charger included), 6.5 hrs extended operating time (continuous)
Shock and vibration Mil 28800E, Type 3, Class III, Style B
Case IP51 (dust, drip, waterproof)
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second