Fluke 772 Milliamp Clamp Meter Fluke 772 Milliamp Clamp Meter Fluke 772 milliamp clamp meter saves time & money by measuring output signals without breaking the loop or bringing down the system, and adds loop power. P000058 Clamp Meters 0 VND Quantity: 1 Cái


  •  
  • Fluke 772 Milliamp Clamp Meter

  • Post on 22-09-2015 02:28:38 PM - 966 Views
  • Price: Contact

  • Fluke 772 milliamp clamp meter saves time & money by measuring output signals without breaking the loop or bringing down the system, and adds loop power.


Quantity

Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 772 Clamp Meters will help you:

Milliamp Clamp Features

Measure mA signals for PLC and control system analog I/O without breaking the loop

  • Measures low level dc current
  • Correlate process indication with real physical value

Measure output signals from transmitters without breaking the loop

  • Maintain and troubleshoot process and automation equipment without breaking the loop
  • No disruption to the process

Detachable clamp with extension cable

  • Measurements in tight locations
  • Enables measurements in difficult situations

Measurement Spotlight

  • Illuminates hard to see wires in dark enclosures
  • Measurement process is easier and quicker

Measure up to 99.9 mA range non-contact

  • Wide range of measurements
  • Measures 10 to 50 mA signals in older control systems

Automatic power off

  • After 15 minutes and 2 minute automatic off for backlight and spotlight
  • Saves battery life
Specifications
Diameter of measurable conductor 0.177” or 4.5 mm max
Operating temperature -10 to 50ºC
Storage temperature -25 to 60ºC
Operating humidity < 90% @ <30ºC, < 75% @ 30 to 55ºC
Operating altitude 0 to 2000 m
IP rating IP 40
Size 44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
Weight 410 g, (14.4 oz)
Vibration Random 2 g, 5 to 500 Hz
Shock 1 meter drop test (except the jaw)
EMI/RFI Meets EN61326-1 
For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient 0.01% ºC 
(< 18ºC or > 28ºC)
Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
Warranty Three years for electronics 
One year for cable and clamp assembly
Functional Specifications
mA measurement 
(measured by clamp)
Resolution / range 0 to 20.99 mA
Accuracy 0.2% + 2 counts
Resolution / range 21.0mA to 100.0 mA
Accuracy 1% + 5 counts
mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second